The BioGuard 3-step pool maintenance program
The sun is finally creeping out from behind the clouds, and although it felt as if it would never end… winter is finally over! And the best thing about that? It’s nearly pool season!
Before you pour the celebratory cocktails and invite the entire neighbourhood over for a soiree in the sun, you’ll need to make sure your pool is summer-ready.
When you’re in winter hibernation mode, it’s easy to let your pool maintenance fall by the wayside. Luckily, we’re here to help with the BioGuard 3 Step Program. If your pool is in desperate need of a spring clean, this is the fail-safe method for crystal clear water every time.
Step 1 – Healthy water
Properly sanitised water is essential for a healthy pool. A sanitiser, often referred to as chlorine or salt (for salt pools), is the product that will keep your water healthy by destroying bacteria. If you only treat your pool with sanitiser, however, it won’t perform at the optimal level.
Treating your pool with ONLY a sanitiser will mean:
- Only 20% of the sanitiser kills bacteria
- 40% is used to clear cloudy water
- 40% is used to kill algae
Sanitiser is the foundation of all good pool maintenance programs. But as the 3 Step Program outlines, the product can only reach its full potential when used in conjunction with other treatments.
BioGuard Pacific Blue Tabs is a fantastic option for standard chlorine pools. With a concentrated formula (so you use less), and containing water enhancing agents, it’s a product that will save you money while also making your water silky smooth. Or if you have an automatic feeder or suitable floater, use BioGuard Swim Tabs. Alternatively, if you have a salt or fresh water swimming pool, dose and forget with BioGuard Smarter Sticks . A stabilised sanitiser in easy-to-use controlled dissolve sticks.
Step 2 – Sparkling water
We’d argue that there’s nothing better than sparkling crystal clear water, and to achieve that you’re going to have to use an oxidiser! An oxidiser works by removing all the impurities from the water – allowing the sanitiser to get to work! And, as an added benefit, it also makes the water more comfortable for your swimmers. This combination puts you ahead of the pack, but if you don’t make it the trifecta, you’re still missing out.
If you only follow Steps 1 and 2:
- 60% of the sanitiser will be killing bacteria
- 40% of the sanitiser is working to remove algae
BioGuard Lite is a patented maintenance oxidiser designed to improve sanitiser efficiency. It dissolves almost immediately, allowing swimmers back into the water after an hour! And for a salt pool, BioGuard Salt Pool Sparkle will deliver the same great results.
Step 3 – From green to clean
Algae spores are always lurking in your pool water, waiting to bloom in the right conditions. To remove the spores from the water and keep your pool from turning the dreaded green, you need to add an algaecide to your maintenance program.
Using an algaecide frees the sanitiser, so:
- 100% of your sanitiser is working to remove harmful bacteria
BioGuard AlgiGuard fights against a variety of Algae and won’t affect your water balance. Likewise, for salt pools, your best choice is BioGuard Salt Pool Protector.
And remember, you can always visit your local BioGuard Approved Retailer for assistance in finding the best products that cater to your pool maintenance needs.
Following our simple 3 Step Program and we guarantee your sanitiser will work at peak efficiency. Delivering you perfect pool water and saving you money! Now that’s a reason to break out the cocktails and celebrate!